Auto HVAC
by: Kevin Schappell
Not only do we depend on our cars to get us where we want to go, we also depend on them to get us there without discomfort. We expect the heater to keep us warm when it's cold outside, and the air conditioning system to keep us cool when it's hot.
We get heat from the heater core, sort of a secondary radiator, which is part of the car's cooling system. We get air conditioning from the car's elaborate air conditioning system.
Despite its relatively small size, the cooling system has to deal with an enormous amount of heat to protect the engine from friction and the heat of combustion. The cooling system has to remove about 6,000 BTU of heat per minute. This is a lot more heat than we need to heat a large home in cold weather. It's good to know that some of this heat can be put to the useful purpose of keeping us warm.
Air conditioning makes driving much more comfortable in hot weather. Your car's air conditioner cleans and dehumidifies (removes excess moisture), the outside air entering your car. It also has the task of keeping the air at the temperature you select. These are all big jobs. How do our cars keep our "riding environment" the way we like it?
Most people think the air conditioning system's job is to add "cold" air to the interior of the car. Actually, there is no such thing as "cold," just an absence of heat, or less heat than our bodies are comfortable with. The job of the air conditioning system is really to “remove” the heat that makes us uncomfortable, and returns the air to the car's interior in a "un-heated" condition. Air conditioning, or cooling, is really a process of removing heat from an object (like air).
A compressor circulates a liquid refrigerant called Refrigerant-12 (we tend to call it "Freon," a trade name, the way we call copy machines "Xerox" machines). The compressor moves the Refrigerant-12 from an evaporator, through a condenser and expansion valve, right back to the evaporator. The evaporator is right in front of a fan that pulls the hot, humid air out of the car's interior. The refrigerant makes the hot air's moisture condense into drops of water, removing the heat from the air. Once the water is removed, the "cool" air is sent back into the car's interior. Aaaaaah! Much better. Newer cars have R-134 as the refrigerant, but work in the same way as R-12.
Sometimes we worry when we catch our car making a water puddle on the ground, but are relieved to discover that it's only water dripping from the air conditioning system's condenser (no color, no smell, and it dries!).
Note: Refrigerant is extremely dangerous. Many special precautions must be taken when it is present. It can freeze whatever it contacts (including your eyes), it is heavier than air and can suffocate you, and it produces a poisonous gas when it comes in contact with an open flame.
The above information is directly from the Auto Insight program, which you can buy online from AutoEducation.com.
Common Problems:
From time to time the A/C system needs to be recharged to bring it back up to maximum efficiency. Sometimes a leak may cause loss of refrigerant and will need to be fixed before refilling. It's difficult to tell if a leak is present without specific test equipment so let it up to a professional.
Corrosion will cause the heater core (secondary radiator) to leak. This will manifest itself by leaving steam into the passenger compartment and fogging your windows. You will know there is a leak by the sweet smell coming from your vents. Unfortunately changing the heater core is usually not the easier job in the world, as engineers tend to squeeze them into some pretty tight spaces under the dash.
About The Author
Kevin Schappell maintains http://www.carbuyersclub.com where he gives advice on buying, selling, insurance, and financing. A mechanical engineer and car guy, Kevin has decided to spend his online time helping others learn about automobiles. To learn more about how your car works, Kevin has created http://www.mycarwizard.com.
kevin@schappell.com
This article was posted on December 23, 2004
Se afișează postările cu eticheta cooling. Afișați toate postările
Se afișează postările cu eticheta cooling. Afișați toate postările
duminică, 25 decembrie 2011
Auto And Trucks
The Cooling System
by: Kevin Schappell
The purpose of the engine's cooling system is to remove excess heat from the engine, to keep the engine operating at its most efficient temperature, and to get the engine up to the correct temperature as soon as possible after starting. Ideally, the cooling system keeps the engine running at its most efficient temperature no matter what the operating conditions are.
As fuel is burned in the engine, about one-third of the energy in the fuel is converted into power. Another third goes out the exhaust pipe unused, and the remaining third becomes heat energy.
A cooling system of some kind is necessary in any internal combustion engine. If no cooling system were provided, parts would melt from the heat of the burning fuel, and the pistons would expand so much they could not move in the cylinders (called "seize").
The cooling system of a water-cooled engine consists of: the engine's water jacket, a thermostat, a water pump, a radiator and radiator cap, a cooling fan (electric or belt-driven), hoses, the heater core, and usually an expansion (overflow) tank.
Fuel burning engines produce enormous amounts of heat; temperatures can reach up to 4,000 degrees F when the air-fuel mixture burns. However, normal operating temperature is about 2,000 degrees F. The cooling system removes about one-third of the heat produced in the combustion chamber.
The exhaust system takes away much of the heat, but parts of the engine, such as the cylinder walls, pistons, and cylinder head, absorb large amounts of the heat. If a part of the engine gets too hot, the oil film fails to protect it. This lack of lubrication can ruin the engine.
On the other hand, if an engine runs at too low a temperature, it is inefficient, the oil gets dirty (adding wear and subtracting horsepower), deposits form, and fuel mileage is poor-- not to mention exhaust emissions! For these reasons, the cooling system is designed to stay out of the action until the engine is warmed up.
There are two types of cooling systems; liquid cooling and air cooling. Most auto engines are cooled by the liquid type; air cooling is used more frequently for airplanes, motorcycles and lawnmowers.
Liquid cooled engines have passages for the liquid, or coolant, through the cylinder block and head. The coolant has to have indirect contact with such engine parts as the combustion chamber, the cylinder walls, and the valve seats and guides. Running through the passages in the engine heats the coolant (it absorbs the heat from the engine parts), and going through the radiator cools it. After getting "cool" again in the radiator, the coolant comes back through the engine. This business continues as long as the engine is running, with the coolant absorbing and removing the engine's heat, and the radiator cooling the coolant.
A cooling system pressure tester is used to check the pressure in the cooling system, which allows the mechanic to determine if the system has any slow leaks. The leak can then be found and fixed before it causes a major problem.
The above information is directly from the Auto Insight program which you can buy online from AutoEducation.com.
Common Problems:
Let's look at the common problems cars have with the cooling system.
Broken hose. Hoses wear out and can leak. Once the coolant has left the system it can no longer cool the engine and it overheats.
Broken fan belt. The water pump is driven by the engine through a belt. If the belt breaks the water pump can not turn and coolant will not be circulated through the engine. This will also lead to engine overheating.
Faulty radiator cap. The radiator cap is designed to hold a certain pressure in the coolant system. Most caps hold 8 - 12 PSI. This pressure raises the point in which the coolant will boil and maintains a stable system. If your cap does not hold pressure, then the car could overheat on hot days since the system never becomes pressurized.
Water pump failure. Most commonly you will hear a screeching noise and will be able to see coolant leaking from the front of the pump or under the car. Early signs are small spots of coolant under the car after being parked overnight and a strong coolant odor while driving.
Head gasket... have large amounts of white smoke flowing out of your exhaust? Could be a head gasket. The head gasket seals the cylinder head to the engine block and also seals the coolant passages. When this gasket fails coolant can enter the cylinder and it will be turned to vapor as the engine fires. Head gaskets most often fail after the engine has experienced an overheating situation. When super hot, the cylinder head can warp and allow the gasket to fail.
Preventive Maintenance:
Check all belts and hoses regularly. (at oil change is a good time)
Look out for coolant leaks underneath the car, they could be signs of trouble to come.
Change your coolant every 2 - 3 years depending on the manufactorers recommendations.
Inspect your radiator cap for deterioration of the rubber seal. Replace if you think it is worn. $5 - $10 is cheap insurance.
Have your coolant system flushed every 5 years. It gets all the corrosion which has built up out of the system.
What to discuss with your mechanic:
Let your mechanic know when your overheating problems occur. Overheating when idling points to a different problem than overheating at highway speeds.
Ask your mechanic if it's worth changing the timing belt or chain while he is replacing your water pump. Many times the timing belt turns the water pump so it has to be removed anyway to access the water pump.
WARNING: Never open your radiator when the engine is hot. The pressure in the system can cause hot coolant to splash out and burn you.
About The Author
Kevin Schappell maintains http://www.carbuyersclub.com where he gives advice on buying, selling, insurance, and financing. A mechanical engineer and car guy, Kevin has decided to spend his online time helping others learn about automobiles. To learn more about how your car works, Kevin has created http://www.mycarwizard.com.
kevin@schappell.com
This article was posted on December 23, 2004
by: Kevin Schappell
The purpose of the engine's cooling system is to remove excess heat from the engine, to keep the engine operating at its most efficient temperature, and to get the engine up to the correct temperature as soon as possible after starting. Ideally, the cooling system keeps the engine running at its most efficient temperature no matter what the operating conditions are.
As fuel is burned in the engine, about one-third of the energy in the fuel is converted into power. Another third goes out the exhaust pipe unused, and the remaining third becomes heat energy.
A cooling system of some kind is necessary in any internal combustion engine. If no cooling system were provided, parts would melt from the heat of the burning fuel, and the pistons would expand so much they could not move in the cylinders (called "seize").
The cooling system of a water-cooled engine consists of: the engine's water jacket, a thermostat, a water pump, a radiator and radiator cap, a cooling fan (electric or belt-driven), hoses, the heater core, and usually an expansion (overflow) tank.
Fuel burning engines produce enormous amounts of heat; temperatures can reach up to 4,000 degrees F when the air-fuel mixture burns. However, normal operating temperature is about 2,000 degrees F. The cooling system removes about one-third of the heat produced in the combustion chamber.
The exhaust system takes away much of the heat, but parts of the engine, such as the cylinder walls, pistons, and cylinder head, absorb large amounts of the heat. If a part of the engine gets too hot, the oil film fails to protect it. This lack of lubrication can ruin the engine.
On the other hand, if an engine runs at too low a temperature, it is inefficient, the oil gets dirty (adding wear and subtracting horsepower), deposits form, and fuel mileage is poor-- not to mention exhaust emissions! For these reasons, the cooling system is designed to stay out of the action until the engine is warmed up.
There are two types of cooling systems; liquid cooling and air cooling. Most auto engines are cooled by the liquid type; air cooling is used more frequently for airplanes, motorcycles and lawnmowers.
Liquid cooled engines have passages for the liquid, or coolant, through the cylinder block and head. The coolant has to have indirect contact with such engine parts as the combustion chamber, the cylinder walls, and the valve seats and guides. Running through the passages in the engine heats the coolant (it absorbs the heat from the engine parts), and going through the radiator cools it. After getting "cool" again in the radiator, the coolant comes back through the engine. This business continues as long as the engine is running, with the coolant absorbing and removing the engine's heat, and the radiator cooling the coolant.
A cooling system pressure tester is used to check the pressure in the cooling system, which allows the mechanic to determine if the system has any slow leaks. The leak can then be found and fixed before it causes a major problem.
The above information is directly from the Auto Insight program which you can buy online from AutoEducation.com.
Common Problems:
Let's look at the common problems cars have with the cooling system.
Broken hose. Hoses wear out and can leak. Once the coolant has left the system it can no longer cool the engine and it overheats.
Broken fan belt. The water pump is driven by the engine through a belt. If the belt breaks the water pump can not turn and coolant will not be circulated through the engine. This will also lead to engine overheating.
Faulty radiator cap. The radiator cap is designed to hold a certain pressure in the coolant system. Most caps hold 8 - 12 PSI. This pressure raises the point in which the coolant will boil and maintains a stable system. If your cap does not hold pressure, then the car could overheat on hot days since the system never becomes pressurized.
Water pump failure. Most commonly you will hear a screeching noise and will be able to see coolant leaking from the front of the pump or under the car. Early signs are small spots of coolant under the car after being parked overnight and a strong coolant odor while driving.
Head gasket... have large amounts of white smoke flowing out of your exhaust? Could be a head gasket. The head gasket seals the cylinder head to the engine block and also seals the coolant passages. When this gasket fails coolant can enter the cylinder and it will be turned to vapor as the engine fires. Head gaskets most often fail after the engine has experienced an overheating situation. When super hot, the cylinder head can warp and allow the gasket to fail.
Preventive Maintenance:
Check all belts and hoses regularly. (at oil change is a good time)
Look out for coolant leaks underneath the car, they could be signs of trouble to come.
Change your coolant every 2 - 3 years depending on the manufactorers recommendations.
Inspect your radiator cap for deterioration of the rubber seal. Replace if you think it is worn. $5 - $10 is cheap insurance.
Have your coolant system flushed every 5 years. It gets all the corrosion which has built up out of the system.
What to discuss with your mechanic:
Let your mechanic know when your overheating problems occur. Overheating when idling points to a different problem than overheating at highway speeds.
Ask your mechanic if it's worth changing the timing belt or chain while he is replacing your water pump. Many times the timing belt turns the water pump so it has to be removed anyway to access the water pump.
WARNING: Never open your radiator when the engine is hot. The pressure in the system can cause hot coolant to splash out and burn you.
About The Author
Kevin Schappell maintains http://www.carbuyersclub.com where he gives advice on buying, selling, insurance, and financing. A mechanical engineer and car guy, Kevin has decided to spend his online time helping others learn about automobiles. To learn more about how your car works, Kevin has created http://www.mycarwizard.com.
kevin@schappell.com
This article was posted on December 23, 2004
Abonați-vă la:
Postări (Atom)